Hardware Specifications
- Processor
- 1.2GHz VIA C7®-M ULV Processor (BGA Type)
- Featuring VIA Padlock Security Engine for Data Encryption
- 400 MHz Front Side Bus
- Supports SSE, SSE2, SSE3 instructions
- Cooling via Heat Sink without fan plus reserved fan solution
- Chipsets
- VIA VX700 with integrated S3G VIA UniChrome™ Pro II IGP Graphics
- Integrated Southbridge with 8-channel HD Audio (AC'97)
- V-Link 533 MB/s bandwidth North/South Bridge interconnect
- Memory
- 1x SODIMM DDR2-400 slot
- Standard 1.0 GB installed
- BIOS
- Phoenix Award BIOS v6.00PG includes system and video
- 8 Mbits Flash | Boot from USB | Plug & Play (TBD)
- APM 1.2 | ACPI BIOS
- Supports S3 and S4 power states
- Password Protection
- Battery
- Modular Battery Bay
- Rechargeable 4-cell Lithium-Ion Battery pack (4S1P / 35.5 W / 14.8 V @ 2600 mAh)
- Nominal battery life of 3 ~ 4 hours
- Hard Drive
- 1.8" format, 9.5mm height, 40 GB
- Bus Mastering, Ultra DMA 133
- Video
- 200 MHz 128-bit 2D and 3D Graphics Engine
- Chromotion™ video engine supporting Video De-Blocking and Adaptive De-Interlacing
- MPEG-2/MPEG-4/WMV9 Decoding Accelerators
- Shared Memory up to 128 MB
- DuoView+™ Support
- Native resolution of 800x600 with LVDS interface
- Software interpolation to 1024x600
- Screen Rotation supported
- External display (via VGA Sub-D out) up to QXGA (2048x1536)
- Display
- 7" TFT wide angle viewable LCD display with LED backlighting
- 250 cd/mē Luminance
- PanJit SRII Sunlight Readable Screen (standard)
- Audio
- AC '97 Controller
- High Definition Audio CODEC VT1708
- 2x .5W Built-in stereo speakers
- 3.5mm Headphone Jack and Built-in Stereo Microphone
- Wireless
- Winbond 802.11b/g networking with power ON/OFF switch
- 802.11X (Direct Sequence Spread Spectrum) built in
- Bluetooth® 2.0+EDR built-in module
- Camera
- 1.3 Mega Pixel (1280 x 1024) CMOS Camera
- Video Capture (up to 640x480)
- Input
- 4 wire Analog Resistive Touch Screen with Fujitsu® interface
- 80 grams sensitivity
- Synaptics Stick Pointer TS42P016 with Z-axis functionality
- Expansion Slot
- PCMCIA 2.1 Compliant, Supports one (1) Type II 32-bit PC Card Bus Architecture
- I/O Ports
- 1x DC-In
- 1x RJ45 10/100/1000 Mbps Ethernet
- 1x Headphone/Audio Out
- 1x 4-pin USB 2.0
- 1x VGA Out
- 1x SD/MMC Media Card Reader
- 1x Cradle Connector (Cradle provides 3x USB 2.0, VGA Out, 10/100 Ethernet, Power, Serial (COM))
- Security
- AuthenTec AES2501 Fingerprint Sensor (192x16 @ 500 ppi)
- WEP, WPA, WPA2, EAP, LEAP, PEAP